Jensen Batch Transfer Drying Tumbler DT
Jensen Batch Transfer Drying Tumbler DT
High Performance with less energy
Highlights
- Dryer bestseller thanks to low energy consumption
- High evaporation performance
- Low noise level for more operational safety
- Low maintenance
Dryer bestseller thanks to low energy consumption
- Rugged, well sealed and heat insulated sheet steel housing for low heat emission and little energy demand.
- Thanks to InfraCare, the infrared control, the drying process is optimized even further: Both the energy consumption and the drying time is reduced, since the linen temperature is the regulating variable and not the exhaust air temperature.
High evaporation performance
- High drum volume with large perforated surface for optimized air flow and high evaporation performance.
- Efficient fans and optimum air duct take care for a high evaporation performance.
Low noise level for more operational safety
- Components with optimal efficiency and good insulation make sure that the noise level is very low.
Low maintenance
- Low maintenance effort thanks to easy drum access, dynamic sealing with automatic readjustment and direct drive of the drum.
- Good accessibility saves time and money during the production time.
Jensen Butterfly
Jensen Butterfly
Provides the best folding quality
to the full range of towels thanks
to lateral folding by mechanical
templates and folding knives.
Highlights
- Top quality folding
- Top quality stacking
- Flexible solution
- High capacity
Top-quality folding
- Lateral folding by mechanical templates and knife.
- Cross folding by reversing conveyors.
- Half fold and French fold possible.
Top-quality stacking
- Stacking on Roll-Off stacking conveyor or directly on delivery conveyor possible.
- Uniform stacking thanks to the accurate positioning of the folded piece.
Flexible solution
- Half fold and French fold is possible.
- Towels and leight uniforms possible depending on model and options.
- Bypass during the machine is possible.
High capacity
- Minimum human intervention thanks to automatic folding, sorting and stacking according to program and towel size.
- Machine capacity up to 1600 small towels, or 1200 towels of mixed sizes.
Jensen Centrifuge Z1200Plus Z1300Plus Z1400
Jensen Centrifuge Z1200Plus Z1300Plus Z1400
High performance centrifugal extractors for batch sizes of up to 100 kg / 220 lbs
Highlights
- Low and even moisture retention of the batches
- High G-force drum
- Very short cycle times (min. 150 sec. for poly-cotton garments)
Low and even moisture retention of the batches
- The inner drum has a large perforated drum surface for best water extraction performance.
- Due to low moisture retention figures and an even distribution of the moisture within the batch, garments can often be finished directly after the centrifugal extractor in a tunnel finisher (without conditioning in a dryer).
- The moisture retention values for heavy cotton articles will be lower in a press compared to a centrifuge, especially with short cycle times.
High G-force drum
- The new inner drum has been designed by means of the most modern development methods to ensure maximum safety at high G-forces of over 800 G and has been equipped with a large perforated surface for a quick drainage of the water.
Very short cycle times
- Basically all linen categories processed in a batch washing system can be extracted in a JENSEN centrifuge, however, the best application is the extraction of articles with a content of synthetic fibres, like poly-cotton garments, microfibres, incontinence pads, etc. Especially poly-cotton garments can be extracted more efficiently in a centrifuge than in a press even with very short cycle times.
New cushioning system
Minimum dynamic floor loads due to decoupling of the rotating drum unit from the base frame by inflatable air cushions Releasable friction absorbers for best balancing High efficient drive motor with low energy consumption.
Jensen Classic Folder
Jensen Classic Folder
Fast, simple and reliable high-speed combination folder
Highlights
- Fast
- Simple and reliable
- Versatile folder combining high folding quality and high speed
- Maximum production
Fast
- High-speed folder using the fast and well-proven air-blast technique.
Simple and reliable
- Simple and reliable high-speed folder performing the lateral folds by air blast.
Versatile folder
- Can be configured to meet the requirements within the healthcare sector as well as the hospitality sector.
- Large selection of cross fold sections according to requirements.
- High quality ensured by guiding the linen between sandwich belts through the lateral folding section.
- Performs up to 3 lateral folds and up to 3 cross folds depending on model and options.
- Available for 1 lane, 1&2 lanes and 1&3 lane operation.
Maximum production
- Minimum human intervention required thanks to automatic adjustment of folding parameters according to customer, article, and category.
Jensen Classic S Folder
Jensen Classic S Folder
Fast, simple and reliable high-speed combination folder
Highlights
- Fast
- Simple and reliable
- Versatile folder combining high folding quality and high speed
- Maximum production
Fast
- High-speed folder using the fast and well-proven air-blast technique.
Simple and reliable
- Simple and reliable high-speed folder performing the ”classic” folds by air blast.
Versatile folder
- Can be configured to meet the requirements within the healthcare sector as well as the hospitality sector.
- Large selection of cross fold sections according to requirements.
- High quality ensured by guiding the linen between sandwich belts through the lateral folding section.
- Performs up to 3 lateral folds and up to 3 cross folds depending on model and options.
- Available for 1 lane operation.
Maximum production
- Minimum human intervention required thanks to automatic adjustment of folding parameters according to customer, article, and category.
Jensen Jenfeed Basic Plus
Small-piece feeder for top-quality feeding of small and medium size linen
- Compact, space saving solution
- Optimum ergonomic working position with trolleys in front of the operators
- Separate suction zones for the suction chamber and feeding table
- Spreading brushes and stretch conveyor on the feeding conveyor possible
- Direct feeding into the ironer with suction under the feeding belts possible
Jensen Jenfeed Logic 2000
Jensen Jenfeed Logic 2000
Simple and reliable feeder for fast feeding of large-piece linen
Highlights
- Simple and reliable feeder for fast feeding of large piece linen.
- Designed to handle sheets and duvet covers in 1 or 2 lanes.
- Optimum ergonomic working conditions.
- Available with 2, 3 or 4 feeding stations.
Simple and reliable feeder
- Simple and reliable large-piece feeder designed for the healthcare segment.
Optimum ergonomic working conditions
- Fast and easy feeding of large pieces thanks to the unique “Easy Clamp”, enabling the operators to easily clip corners into the clamps.
Jensen Jenfold Concorde TF
The Jensen Jenfold Concorde TF is a high-precision towel folder developed with special focus on optimizing the folding and stacking quality of towels for high-end hotels and spa resorts.
- Top-quality primary folds by folding plates
- Top-quality cross folds by knife and reversing conveyors
- Top-quality stacking by over-turning stacking plate and height-adjustable stacking table
- Stacking table can store up to 3 stacks at a time
- Integration with Jenway conveyor system possible
- Jentrol HMI PLC control system and operating panel with touch screen and digital counters
- Up to 99 programs available.
Jensen Jenroll EX
Jensen Jenroll EX Industrial Ironer
Heavy-duty ironer for integrated finishing lines
- Steam-heated ironer with the traditional fixed chest
- Alternatively oil is used as the heating medium
- Working width up to 4000mm
- Roll diameter 800, 1000 and 1200mm
- 1-4 rolls per machine
Jensen Jenroll EXPG
Jensen Jenroll EXPG
Roll diameter 800, 1200 and 2000* mm.
Number of rolls per machine: 1 – 3 Working widths: From 3000 to 4200 mm.
Working widths: From 3000 to 4200 mm.
EXPG
High-capacity, self-contained gas
ironer with optimized evaporation
capacity by the flexible chest.
Highlights
- Optimized evaporation capacity.
- Excellent finishing quality.
- Reduced energy consumption.
- Optimum flexibility
Optimized evaporation capacity
- Increased contact angle thanks to the flexible chest adapting to the roll diameter like a “band brake”.
- 25 to 50% higher evaporation capacity over time compared to a conventional fix chest ironer.
- Up to 3 rolls with a roll diameter of 800 and 1200 mm available.
Excellent finishing quality
- Excellent finishing quality and minimum friction by the use of carbon steel material for ironing.
Reduced energy consumption
- Reduced heat radiation as the higher capacity of a 2-roll Jenroll EXPG can replace a conventional fixed chest ironer using more rolls.
- Reduced cubic content and less material to heat up in the morning thanks to the flexible chest.
- Minimum heat escape thanks to thorough insulation of chests, pipes and steam components.
- No heat distribution loss thanks to the integrated heat exchanger.
- Steam boiler for washing and garment finishing can be shut off when running extra hours on the ironer line.
Optimum flexibility
- Fully adjustable ironing temperature thanks to the gas burner and the flexible chest, enabling to iron 100% cotton at high temperature, and mixed products at a low temperature.
- Stand-alone unit not depending on steam.
- Possible to expand the number of ironer lines without expanding the steam capacity.
- Existing steam energy can be released for other purposed.